How to Fix LG TV Error Code 106: A Step-by-Step Guide? ( May 24, 2023)

LG TVs are known for their sleek design and impressive picture quality. However, even the best TVs can experience problems from time to time. One common error that LG TV owners may encounter is error code 106. This error indicates that there is a problem with the TV’s internet connection.

There are a few things you can do to try to fix error code 106 on your LG TV.

1. Check the speed of your internet connection.

The first step is to make sure that your internet connection is fast enough to support streaming video. You can use an online speed test to check your internet speed. If your internet speed is slow, you may need to contact your internet service provider to upgrade your plan.

2. Check all the network cables.

If you are using a wired connection, make sure that all the network cables are properly connected. Loose or damaged cables can cause internet connection problems.

3. Power cycle the router.

Sometimes, a simple power cycle can fix internet connection problems. To power cycle your router, unplug it from the power outlet for 30 seconds, then plug it back in.

4. Power cycle the LG TV.

Just like with the router, a power cycle can sometimes fix internet connection problems on the LG TV. To power cycle the TV, unplug it from the power outlet for 30 seconds, then plug it back in.

5. Change the DNS address on the TV.

The Domain Name System (DNS) is responsible for translating human-readable domain names into machine-readable IP addresses. If the DNS settings on your LG TV are incorrect, you may experience internet connection problems.

To change the DNS settings on your LG TV, follow these steps:

1. Open the Settings menu.
2. Select Network.
3. Click on the WiFi connection.
4. Click on Advanced Settings.
5. Scroll down and click on Edit.
6. Remove the check from the Set Automatically option.
7. Enter the following DNS addresses:
   • Preferred DNS: 8.8.8.8
   • Alternate DNS: 8.8.4.4
8. Click on Connect.

6. Add the MAC address assigned to your TV to the router’s directory.

Some routers have a feature that allows you to only allow certain devices to connect to the internet. If this feature is enabled, you will need to add the MAC address of your LG TV to the router’s directory.

To find the MAC address of your LG TV, follow these steps:

1. Open the Settings menu.
2. Select Network.
3. Click on the WiFi connection.
4. The MAC address will be listed under the Physical Address heading.

Once you have the MAC address, you can add it to the router’s directory. The process for doing this will vary depending on your router’s model.

7. Update the firmware on the LG TV.

LG TVs are constantly being updated with new firmware. These updates can often fix bugs and improve performance. To check for a firmware update, follow these steps:

1. Open the Settings menu.
2. Select Support.
3. Click on Software Update.
4. The TV will check for a new firmware update. If an update is available, the TV will download and install it automatically.

8. Contact the LG TV official support team.

If you have tried all of the above solutions and you are still experiencing error code 106, you may need to contact the LG TV official support team. They will be able to help you troubleshoot the issue and find a solution.